Polishing Abrasive & Coating Kit for Lights

Product Features

This polishing abrasive & coating kit is for removing yellowness and dimness and also coats the lens of headlights and tail lamps.

Using the cleaner and the microfiber cloth come with the package, the yellowness and dimness can be removed, restoring the original clearness of the lights. Moreover, the coating agent will form a strong protective coating on the surface, give a glamorous gloss, and protect the lens from UV and dirt. The sustained effect lasts for 12 months. 

Everything you need is in this kit. Get ready to bring back the beautiful shine on your headlights.

How to use

【Before Use】

■Test in an unobvious area before use (especially for seriously deteriorated areas).

■This product is not effective for cracks and scratches on the lens, or if there is no oxidization on the lens, or if the resin itself is discolored.

■The cleaner contains abrasive and can be used to removing damaged coating.

■The coating agent should be used up once opened, as it will turn hard due to reacting with moisture. ■The coating will turn completely hard after 1 day and will become very difficult to remove. If accidentally spilled to other surface or clothes, wipe off and wash with water immediately.

■It is recommended to mask the surrounding of lens before use.

■Use up the agent as soon as possible after opening. 

【Inapplicable Areas ※Might cause stains, color unevenness or discoloration】 

■New Cars

■Foreign made cars and imported cars

■Interior plastic parts

■Lens with special treatment, such as color finished, rough finished, mat finished, film coated, and so on.

■Rubber or glass parts

■Plated parts

■Helmet and windshield of motorcycles

■Glasses or goggles

■Navigator or any monitor

■Folding textile roof of an open car.

 

【❶Instruction for cleaner】

① Rinse off sand and dirt from the lens and wipe dry. ※Sand and dirt might cause scratches on lens. ②Wear gloves come with the kit on both hands. Shake the cleaner bottle well and put some liquid on the microfiber clothes (blue). Polish along a fixed direction (vertically or laterally) ※Polishing in a circular motion will make the yellowness difficult to be removed. Polishing along a fixed direction helps to remove the yellowness effectively. ※Work for about a 15cm square a time. ※Add more liquid if the cloth becomes difficult to move during polishing. ※Turn to a clean side of cloth if the current side has become dirty during polishing. ※The cloth might be colored due to the removed damaged surface. It is a normal situation. ③Wipe dry with the clean side of microfiber cloth before the liquid drying out on the applied area. ※Repeat the steps if the desired result has not yet been achieved. ※There might be slight unevenness in finish according due to different state of applied areas. ※If the liquid has dried out and is difficult to be removed, slightly wet with water and wipe off with cloth. ※Recap the cap and wash hands after use. 

❷Apply coating agent in the next step.

 

【❷Instruction for coating agent】

①Wear gloves come with the kit on both hands. Wrap the white cloth around the sponge, and put some coating agent on one side of cloth. ※Use a little quantity a time. Do not use too much agent, as it will cause stripe trace on the applied area. ②Apply the coating agent evenly and  thinly, along a fixed direction. Use a dry cloth to wipe off any trace left on the applied area. Do not apply to the same area too many times. Apply only once usually gives a good finish. 

※For narrow areas or areas which are difficult to apply, instead of using with the sponge, use only the white cloth to apply coating. ※The coating will become dry in about 2 hours and can be touched by fingers without being damaged. It takes about 1 day for complete hardening. ※Do not expose to rain and water, or rub extremely hard before complete hardening. Wipe off any rain or water immediately if accidentally spilled to. ※Dispose hardened or dirty cloth after use. ③Wash hands properly after use.

 

【When needed to re-apply coating agent】

Repeat 【❷Instruction for coating agent】 after complete hardening (about 1 day). ※Do not re-apply while the coating is semi-dried, as it might cause the lens to become opaque or color unevenness. ※The durability of the coating would be affected due to weather and usage.

Precausions

【Precaution when using cleaner】

■Do not use for purposes other than the designated.

■Do not use under a very hot day or when the lens are still heated, as it might cause stains or color unevenness.

■Do not spill the cleaner to other unintended areas. If accidentally spilled, wipe off with a wet cloth immediately.

■Do not leave the cleaner on lens without wiping off, as it will cause stains or color unevenness.

■Do not use if there are foreign objects on the cloth, as it will cause scratches when cleaning.

■Wash the cloth with detergent or soap after use, and let dry before another use.

■Do not use under a very windy day or in a dusty place, as dust and sand will cause scratches when cleaning.

■Do not spill to clothes, as it might cause stains.

■Use in a well-ventilated place.

 

【Precaution when using coating agent】

■Do not use for purposes other than the designated.

■There are chances the coating agent would not fix onto the light lens due to different type of resin (polyethylene, polypropylene)

■Do not use under a very hot day, a rainy day, or when the temperature is below 10℃, as it WILL cause stains or color unevenness. When used for parts such as engine cover, make sure the area is cool before use.

■Do not leave the coating agent on lens without wiping off, as it will cause stains or color unevenness. ■Do not use if there are foreign objects on the cloth, as it will cause scratches.

■Do not use under a very windy day or in a dusty place, as dust and sand will cause scratches.

■Do not spill to clothes, as it might cause stains.

■Use in a well-ventilated place.

 

Size , Weight & Contents

Height

200

Width

120

Depth

46

Weight

171

Contents

1 set

Prostaff Co. Ltd.